|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
| Key Feature |
 |
- Handle bar design for portable feature in DT PC.
- Intel 845GE+ICH4 Controller.
- Support Intel P4 533/400MHz FSB.
- Extend AGP 4X + PCI slot support.
|
 Specification |
| Chassis |
| Material |
All aluminum Chassis |
| Dimension |
212 mm (W) x 306 mm (D) x 242 mm (H) |
| Front Panel |
USB2.0 X2 , 1394( 6 Pin) X1 , SPDIF-In X1 , Center/Bass X1, Rear-Out X1, Line-Out X1, MIC X1 |
| Back Panel |
USB 2.0 X2 , LAN port ( RJ-45) X1 , SPDIF-Out X1 , 1394 ( 6 Pin) X2 , Serial port X1VGA port X1 , PS/2 keyboard X1 , PS/2 mouse X1 ,Headphone X1, Line-in X1, MIC-in X1 |
| Extension Bay |
5.25" drive x 1, 3.5" x 2 (1 x hidden) |
| Mainboard |
| Form Factor |
Flex ATX form factor mother board |
| CPU |
- Support Intel Celeron Pentium 4 Northwood processor
- FSB 400/533 MHz frequencies supported
|
| Chipsets |
- North Bridget Intel 845GE (Brookdale GE)
- South Bridget:ICH4With USB 2.0 controller
|
| Memory |
- Support dual channel DDR200/266/333 SDRAM, up to 2GB
- Two 184-pin DIMM sockets
|
| VGA |
- Integrated Graphics controller in 845GE GMCH
- Support 3D/2D enhancements
- Support extend AGP 4X slot
|
| Audio |
- AC -Link with AC" 97 2.2 compliant
- Realtek ALC650, 5.1 channel AC"97 codec
- SPDIF input/output supported
|
| IDE interface |
- Two enhanced PCI IDE channels to support up to 4 IDE devices with ATA-100 transfer up to 100MB/s
|
| Ethernet |
- Realtek RTL 8100B 10/100 Base-T Ethernet controller
- Full-Duplex supported, WFM 2.0 compliant
|
| Power |
220W with UL; TUV; CE requirement; PFC optional |
| Accessory |
FDD cable, ODD cable, HDD cable, SPDIF cable power cord, CD pro, manual | |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page